Model 8000A Series Reusable Finger Clip Pulse Oximetry Sensors
Nonin 8000A clip fingertip pulse oximetry sensors are ideal for short-term monitoring and spot checks in situations where the risk of cross-contamination is low. With Nonin PureLight® sensor technology and PureSAT® signal processing technology, you can be sure you’re getting consistent results from patient to patient and sensor to sensor.
Enquiry about Model 8000A Series Reusable Finger Clip Pulse Oximetry Sensors
Technical Specification:
SpO2 Low Perfusion Accuracy: 70 to 100% ±2 digits (Arms*)1
Pulse Rate Accuracy: 40 to 240 BPM ±3 digits (Arms*)1
Pulse Rate Motion Accuracy: 40 to 250 BPM ±5 digits (Arms*)1
Pulse Rate Low Perfusion Accuracy: 40 to 240 BPM ±3 digits (Arms*)1
Temperature: 3, 4
Operating: -20 °C to 50 °C (-4 °F to 122 °F)
Storage/Transportation: -40 °C to 70 °C (-40 °F to 158 °F)
Humidity: 3, 4
Operating: 10% to 95% non-condensing
Storage/Transportation: 10% to 95% non-condensing
* ±1 Arms encompasses 68% of the population at zero bias.
1 Additional accuracy and performance information can be found in the sensor accuracy document on the operator’s manual CD.
2 Accuracy specifications based on Nonin’s PureSAT® SpO2 technology and PureLight® sensor technology.
3 For combined oximeter/sensor specifications, refer to the applicable oximetry system’s operator’s manual.
4 Range as tested with Nonin’s PureSAT SpO2 technology.
Measurement Wavelengths and Output Power**:
Red: 660 nanometers @ 3 mW nominal
Infrared: 910 nanometers @ 3 mW nominal
** This information is especially useful for clinicians performing photodynamic therapy.
Compliance
This product complies with ISO 10993.
Not made from natural rubber latex.
Be the first to review “Model 8000A Series Reusable Finger Clip Pulse Oximetry Sensors”
Related products
Pulse Oximeter
Pulse Oximeter
Pulse Oximeter
Pulse Oximeter
Reviews
There are no reviews yet.